Контроллер полета HappyModel X12 ELRS Pro 5in1 AIO Встроенный 2,4G ELRS V3.0 OPENVTX 400 мВт 1-2S LiPo 25,5X25,5 мм для дронов FPV
Description
Betaflight firmware target:
betaflight_4.4.0_STM32F411
VTX antenna: U.FL
Weight: 5.1g
Size: 30mm*30mm*8mm
controller
X12 ELRS Pro v1.1 AIO 5-IN-1 Flight controller
MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
Sensor: ICM42688P(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
Built-in UART ExpressLRS v3.0.0
Built-in voltage meter sensor , voltage meter scale 110
Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Bluejay v0.19.2
Default protocol: DSHOT300
Recommend ESC Startup power value to min1100/max1200
Onboard UART ExpressLRS 2.4GHz Receiver
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V3.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: Serial_based CRSF
Compatible with ExpressLRS V3.x.x TX Module
Could flash single ELRS receiver firmware by Wifi
ExpressLRS firmware target:
HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher)
Available from Expresslrs version 3.4.0 RC2
Onboard 5.8g OPENVTX
Firmware version: OPENVTX
MSP VTX
PIT Mode support
Channels:40ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL
Specifications
| Option | Values |
|---|---|
| Brand Name |
|
| Item Name |
|
| VTX antenna |
|
| Weight |
|
| Size |
|
| MCU |
|
| Sensor |
|
| Mount hole size |
|
| Power supply |
|
| Current |
|
| Factory firmware |
|
| Default protocol |
|
| Packet Rate option |
|
| ExpressLRS Firmware version |
|
| RF Frequency |
|
| Antenna |
|
| Telemetry output Power |
|
| Receiver protocol |
|
| Firmware version |
|
| Channels |
|
| Transmitting Power |
|
| Current (5v) |
|
| Antenna connector |
|
Product Details
Specifications:
Brand Name: Happymodel
Item Name: X12 ELRS Pro AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
Betaflight firmware target:
betaflight_4.4.0_STM32F411
VTX antenna: U.FL
Weight: 5.1g
Size: 30mm*30mm*8mm
|
controller |
X12 ELRS Pro v1.1 AIO 5-IN-1 Flight controller |
|
Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo HV |
|
Onboard UART ExpressLRS 2.4GHz Receiver |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz |
|
Onboard 5.8g OPENVTX |
Firmware version: OPENVTX |
