CUAV IST8 External Compass of GPS Module PX4 Geomagnetic Sensor 8310 External Compass For Pixhack Pixhawk PX4 APM
135 orders (reference)
Description
CUAV IST8 External Compass of GPS Module PX4 Geomagnetic Sensor 8310 External Compass For Pixhack Pixhawk PX4 APM ============================================================ Description: The IST8 compass module is built into iSentek's 3×3mm LGA geomagnetic sensor IST8310, which is widely used in drone products. The PX4 and ArduPilot have been applied to the Pix flight control and can be used as an external compass for the V5 flight control. Hardware Parameter Compass ist8310 Operating temperature -40~85°c power input interface Weight 23*14*9mm Please connect the ist8 compass to the i2c interface of the flight controller. Please make sure that the arrow in the above figure points to the front of the flight controller. Supported firmware The firmware of the CUAV V5 flight controller is perfectly compatible with the external compass, both pix and apm firmware. If you are using other flight controllers, please contact customer service. Compass calibration See compass calibration interface More information Ist8310 data sheet: http://www.isentek.com/en/dlf.php?file=../ISENTEK/(201703-09)IST8310%20Datasheet%20v1.2_brief-105.09.20.pdf AVAILABLE OPTIONS PIX V5 PRODUCT INFORMATION Brand: CUAV Category: GPS / Navigation Module Wholesale Price: US $19.63 ————————————————————————————————————————
Specifications
| Attribute | Value |
|---|---|
| High-concerned chemical | None |
| Is Electric | No Battery |
| Quantity | 1 pcs |
| Wheelbase | Screws |
| Is it battery/power supply | N |
| Is it charger/adapter | N |
| Is Batteries Included | No |
| Size | NA |
| Technical parameters | KV1100 |
| Model Number | CUAV IST8 PIX V5 |
| For Vehicle Type | Airplanes |
| Tool Supplies | Assembled class |
| Four-wheel Drive Attributes | Assemblage |
| Remote Control Peripherals/Devices | Remote Controller |
| Upgrade Parts/Accessories | Compass |
| RC Parts & Accs | Compass |
| Material | Composite Material |
| Origin | Mainland China |
| Recommend Age | 14+y |
| Use | Vehicles & Remote Control Toys |
Product Details
Description:
The IST8 compass module is built into iSentek's 3×3mm LGA geomagnetic sensor IST8310, which is widely used in drone products. The PX4 and ArduPilot have been applied to the Pix flight control and can be used as an external compass for the V5 flight control.
Hardware Parameter | |
Compass | ist8310 |
Operating temperature | -40~85°c |
power input | 5v |
interface | I2C |
Weight | 5g |
Size | 23*14*9mm |
Please connect the ist8 compass to the i2c interface of the flight controller. Please make sure that the arrow in the above figure points to the front of the flight controller.
Supported firmware
The firmware of the CUAV V5 flight controller is perfectly compatible with the external compass, both pix and apm firmware. If you are using other flight controllers, please contact customer service.
Compass calibration
See compass calibration interface
More information
Ist8310 data sheet: http://www.isentek.com/en/dlf.php?file=../ISENTEK/(201703-09)IST8310%20Datasheet%20v1.2_brief-105.09.20.pdf
