HappyModel Bassline 2S 2inch Micro FPV Toothpick Drone X12 5in1 AIO Flight Controller 2.4G ELRS 400mW EX1103 KV11000 $335.81$336.314 soldNew shoppers save $0.5Free shippingSee previewSimilar items

Description

HappyModel Bassline 2S 2inch Micro FPV Toothpick Drone X12 5in1 AIO Flight Controller 2.4G ELRS 400mW EX1103 KV11000 $335.81$336.314 soldNew shoppers save $0.5Free shippingSee previewSimilar items ============================================================ This drone only for presell now, arrival time on Feb Introduce the Bassline , inspired from Our team pilot Nathan Loopz This idea was originally born in 2019, and today we make it into a BNF. Even though we have many excellent Micro Freestyle drones now days, but the Bassline's performance is still the craziest. Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX VTX Power up to 400mw Support ELRS V3.0 (Need to upgrade firmware) Powerful EX1103 KV11000 motors CaddxFPV Ant FPV camera Recommend 2S 350mah/450mah/550mah/650mah battery (Not include) Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm Specifications: Brand Name: Happymodel Item Name: Bassline 2S 2inch Micro FPV toothpick drone Wheelbase: 90mm Size: 115mm*115mm*40mm Analog version Weight: 40gram Analog version option: 2.4G ELRS SPI SPI Frsky D8/D16 SPI Flysky PNP (without onboard receiver) Package includes: Item Name Bassline 2inch frame and canopy Option1: X12 ELRS V2.1 flight controller built-in SPI ELRS 2.4G receiver Option2: X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Option3: X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Option4: X12 PNP V1.1 flight controller without onboard receiver EX1103 KV11000 brushless motor Gemfan toothpick 2023 tri-blade propellers(4cw+4ccw) Caddx ANT 1200TVL Camera Onboard 5.8G Openvtx 0mw~400mw VTX Canopy for 14mmx14mm camera Screw driver Spare parts specifications: Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2S Propellers Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm Flight controller X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689 or ICM42688P(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Default Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn't flash separately ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX module Onboard SPI Frsky D8/D16 receiver Version SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8/D16 model Channels: 8ch/16ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support Onboard SPI Flysky receiver Version SPI BUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support PNP Version (without onboard receiver) Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DS...MX protocol IR1 pad(invert RX1) used for