Happymodel Mobula 7 Mobula7 1S/HD 75mm Micro FPV Whoop Quadcopter Drone Open VTX 2.4G ELRS Receiver Runcam Nano3 Brushless Motor $154.52$310.05 -50%514 soldNew shoppers save $155.53Lowest price in 90 daysSee previewSimilar items

Description

Happymodel Mobula 7 Mobula7 1S/HD 75mm Micro FPV Whoop Quadcopter Drone Open VTX 2.4G ELRS Receiver Runcam Nano3 Brushless Motor $154.52$310.05 -50%514 soldNew shoppers save $155.53Lowest price in 90 daysSee previewSimilar items ============================================================ Happymodel Mobula7 Mobula 7 1S Micro FPV BWhoop Drone 5IN1 AIO Flight Controller Built-in 2.4G ELRS V2.0 RX Nano3 1/3 CMOS Mobula7 1S/ Mobula7 HD Manual： http://www.happymodel.cn/index.php/2022/05/17/mobula7-1s-and-mobula7-hd-1s-manual-documents/ Remark:The battery is not include in the parcel We’re glad to launched our new Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season. The world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. This is amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller. The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable. New onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event. Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 and Openvtx VTX Power up to 400mw ELRS V2.0 Support NEW RS0802 KV20000 motors Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera Smooth and powerful Compatible for 1S Lipo/LIHV Recommend 1S 450mah/550mah/650mah battery(Not include) Specifications: Brand Name: Happymodel Item Name: Mobula 7 1S 7 5mm Micro FPV whoop drone Wheelbase: 7 5 mm Size: 99 mm* 99 mm* 40 mm Weight: 24 g Receiver option: 2.4G ELRS SPI SPI Frsky D8/D16 SPI Flysky PNP (without onboard receiver) Package includes: Item Name Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame) Option1 : X12 ELRS V3.0 flight controller built-in SPI ELRS 2.4G receiver Option2 : X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Option3 : X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Option4 : X12 PNP V1.0 flight controller without onboard receiver RS0802 KV20000 brushless motor Gemfan 1610-2 bi-blade propellers(4cw+4ccw) Runcam Nano3 1/3 CMOS 800TVL camera Onboard 5.8G Openvtx 0mw~400mw VTX 1S parallel charging board Propeller disassemble tool Extra camera canopy Spare parts specifications: Mode: RS0802 KV20000 Configu-ration:9N12P Stator Diamter: 8 mm Stator Length: 2 mm Shaft Diameter:Φ1 .5 mm Motor Dimension(Dia.*Len):Φ 10.5 mm*1 3.5 mm Weight(g): 2.0 g No.of Cells(Lipo): 1S only Propellers Weight:0.24g Material:PC Pitch:1 inch Props Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm Flight controller X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689 (SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1 S battery input (DC 2.9V - 4.35 V) Built-in 12 A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor Onboard 4in1 ESC Power supply: 1 S LiPo/LiPo HV Current: 12 A continuous peak 15 A ( 3 seconds) Support BLHeliSuite programmable Factory firmware: Z _ H _ 30 _REV16_ 7 .HEX Default protocol: DSHOT 3 00 Support Bluejay firmware Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Rec